Isn't it condenSER? Not condenSOR? As in CondenSER mics? I just want to confirm this and want people to read what really is correct so they won't end up using the same wrong term over and over again to the point it gets tiring.
This is a newbie question - sorry. but I'm just not sure what to set my AT4033 at. There's a LOW CUT and a PAD selection on the mic. Each have two choices. The LOW PAD has a straight line for one choice and a straight line that dips down as the second choice. The PAD has a -10db and 0db? I'm just r...
A lot of condenser mics have a bass rolloff switch, which basically just cuts some of the lower frequencies. I will be using a condenser mic for vocals, and I was wondering if this bass rolloff switch is really necessary? In other words, should I only be looking for condenser mics with this feature ...
I replaced my EMU 1820m with PCi card with the Roland Quadcapture USB. I could record online audio into sonar or Amplitude with the EMU, I guess because of it s multiple assignable ins and outs. how can I do that with the Quad? I am not sure how to use "Direct Monitor". Can I make use of the coa...
The suction line of a refrigeration system is normally insulated with a flexible, closed-cell elastomeric material. Wall thicknesses vary between 3/8- and 1-inch. Medium-temperature systems generally ...
The Copeland Scroll Digital™ R-410A compressor product line can automatically adjust compressor capacity output between 10 and 100 percent, precisely matching capacity output to changing cooling ...