BALTIMORE (WBFF) — We can't exactly talk to our pets, but they are still communicating when they experience pain, especially in underlying conditions like arthritis. Dr. Kim Hammond with falls Road ...
Hello all, I'm very much a newbie to Civil 3D and am trying to create a set of potential road profiles to be overlaid on preexisting alignments/profile views. Each alignment is to get two potential road profiles for different limiting K values on the vertical curves. I was able to create a coupl...
In the intersection design study, I could not connect the second road to the main road at the main road level. As a reason, although I have selected the left alignment profile of the road to which the line is connected, since this surface has a 2% roof slope, the elevation changes where the secondary road is connected.
I have a roadway project with a proposed road profile already set up, with all vertical curves labeled, including high and low points. On one of the sag curves, I need to force the low point to hit at the exact station where there is a proposed inlet (the inlet location cannot be moved), which means...
I have made adjustments to the secondary road profile. Adding tangents, free parabola (PVI based) adjusting grades etc but I just can't get the intersection editor to accept the profile. Is there a specific workflow, or a trick people use to get profiles to always connect at intersections? Mike Kingdon Civil 3D Zealot
One or more of the secondary road profiles cannot be locked at this ...