SOLUTION FOUND. I have built a RIMS 120v single element Temp controller using: TA4-SNR - PID Ruike Electronics Industrial Ltd. SSR-60DA - SSR Same as Fotek K type thermocouple - tried 2 different and getting same issue I have wired the system and all seems to work correctly except the PV or...
K type thermocouple, worked fine for 3-4 brews, now giving weird readings. Seems the wires do not solder well and joints are dry. Is there an option for a panel mount that screws the wires down, not soldered, similar to the silver connector shown in the pic? WHY oh why is the RED wire the...
Which temp sensor is going to give the best performance. The DS's have a much narrower range and output directly in centrigrade. simple + and - 5 VDC and a digital out. The K-Type thermocouples are are 2 wire through the sensor wiring set up with a much larger range. Is the large range going...
Im on the last step of wiring up a pretty simple control panel. Can someone explain to me how to correctly connect this Uxcell K Type -50C to 260C Temperature Controller RTD Thermocouple Sensor 2M to this.. Female XLR3 (3 pin) cable connector and if you would be so kind to explain the...
just bought a 30 gal fryer at Fleet Farm (wisconsin chain of stores) for 49.95. it also has a 20 min timer. the timer is just a electrical/mechanical switch inline of the thermocouple. put a wire jumper across the timer connections and it is bypassed Do you have a pic of the bypass?