I have 0 voltage coming from the icp sensor the truck with crank with no start. Any suggestions on why there is 0 voltage eve with the key on engine off?
Having issue diagnosing this condition: KOEO 1. ICP is at 0 psi 2. IPR is at 14.69% Dc 3. IPR DC voltage is 12vdc KOER 1. ICP is at 3500psi 2. IPR is at 4.69% 3. RPM is at 650rpm Fuel pressure is 52 psi. I checked blockages of the drains in the pump and reservoir, everything is ok. Is...
My ICP voltage can read anywhere from 0.0 to 2.95 and my ICP PSI remains right around 1520 to 1550. The 0 reading is when I have unplugged the ICP Sensor. Injector test runs fine, I can hear all the injectors buzzing as expected. The truck comes closer to starting with the ICP unplugged than it does when it is connected.
Just had my ICP and ICP harness replaced. Symptoms included surging, bucking, missing, and stalling at idle.
I changed out ICP sensor and pigtail 3 months ago because of oil in it and throwing p1280 code. now 3 months later sensor and pigtail has oil in it again and throwing p1280 code almost daily, also truck will randomly die while idling or driving slow 5mph, could that be because of oil in the...
How can I make a qr code free with logo (no sign-up required ...
The script overlays your logo image after QR generation, allowing you to precisely adjust logo size, transparency, and position for optimal scannability while keeping everything local and private.