Lens removal on H is pretty straight forward except for heavy amount of glue / paste they use for original, note second picture. Just remove the 8 screws on the camera cover, no need to disconnect antenna as there is enough cable to put it to the side. There are two small sensors attached to...
As jb57 states, the lens of the C23 is in fact a 39mm lens and; Yuneec does supply a 40.5 mm adapter ring but since you mentioned you don't know much about photography stuff I would add that typical camera lenses (DSLR's, Point-n-Shoots or whatever), have a lens that is threaded female and all standard lens filters and covers like the one in your link fit them. However, the 39mm lens of the ...
There are 2 different housings for the CGO3+. If you contact Peau they will tell you to take a pic of your current lens, minus the lens cover of course, and let you know if you need the lens adapter as well as the lens. Focusing can take a few attempts but once you find the sweet spot it improves the cameras quality considerably.
In order to assimilate the many EOTech configurations and provide ease of installation, GG&G now offers more super lens covers for additional EOTech models, including the 516, 517, SU-231/PEQ (553), ...
Photographers searching for a more practical way to keep their camera lens protected might be interested in the latest generation of camera lens covers created by the team of engineers at KUVRD.
The Clearwater Lights slip-on clear and amber lens covers fit the Clearwater Krista lights (review), the Clearwater Erica lights (review),the Clearwater Glenda lights (review) and the Clearwater Darla ...