In her recently-released debut book of poems, The Mirror of Simple Souls, Leah Flax Barber, OC ’18, guides the reader into the metonymic realm of the carnival. Subverting convention, she tries to ...
Adding a second storage device to the boot pool changes the configuration to a Mirror. This allows one of the devices to fail and the system still boots. If one of the two devices were to fail, that device is easily detached and replaced. When adding a second device to create a mirrored boot pool, consider these caveats: Capacity: The new device must have at least the same capacity as the ...
Some differences between RAIDZ and mirrors, and why we use ... - TrueNAS
Even with the exhaust fan running, my bathroom mirror will fog up. You could open a window, or leave the bathroom door open (subject the the presence/objections of house mates). Or, just wipe it dry with a hand towel when your shower is done.
After confirming going from stripe to mirror was possible I went ahead and built my system with two storage pools. An "main" pool with 2 x 8TB drives for bulk storage and a "fast" pool with SSD's. At the time of building the "fast" pool I only had access to a single 750GB SSD. Knowing that I could extend the pool later, I configured it as a stripe.
Hey everyone, I'm currently facing a bit of a conundrum with my ZFS pool setup, and I'm hoping that some of you knowledgeable folks out there can lend a hand. I have a ZFS pool with a mirror VDEV configuration (2 x 4TB), and I'm looking to expand it by adding a single drive (1 x 6TB). Here are...