A good cup of coffee can shape the start of a day, and the way it is made often makes all the difference. With that in mind, we have put together a list of machines that cater to different brewing sty ...
too many arguments to function 'hw_timer_t* timerBegin (uint32_t)' 528 | timer = timerBegin (0, 80, true); // Alarm value will be in in us it looks like you are attempting to build code using ESP32 core 3.x which was implemented for ESP32 core 2.x have a look at the ESP32 core V3.x Arduino-ESP32 Timer API also worth looking at is Migration from ESP32 core 2.x to 3.x
The best way to answer this is to have you grab your favorite search engine and look for 'WDT RDP32 xxx,' where WDT stands for Watchdog Timer and xxx is the specific unit you have.
I clear the timer, set it up in Input Capture Mode, set the pre-scaler to ClkIO/1024, and enable Overflow interrupts, as the event I'm timing can take up to 10 seconds, which means the timer may overflow twice. I maintain a software count, in a uint32_t that is increment by 65536 every time an overflow occurs.
As you understand I need a hardware timer (counting clock ticks). Millis () makes demanding to ckeck if "old value" is smaller than millis () value (normal run from start until rollover) or greater (1st time after rollover) before any compare.
I am creating a timer for a race. I have a photosensor that has a laser pointed to so when someone crosses the finish, it trips the sensor, and the system logs the racer's time. I am using millis() to time the race, but I need the timer to start when I push the button. I have tried using edge detection to start the timer, but the timer starts when the program starts, not when the program ...